 |
 |
 |
 |
Heavy Duty Professional Series: Peruzzo Skidsteer Q/A 'ST-SSQ/A', 31" Cut Rotary Side Trim Rotary Mower.
Expect This Peruzzo Mower & ALL Of The Equipment We Sell To Be Excellent Equipment w/Excellent U.S. Parts & Tech Support That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too! Our Side Trim Heads Are The Largest Available & For Reliable Quality and Performance, They Are NOT The Cheap, Problematic Imported Ones!
GENERAL FEATURES:
-
Mower Assembly Ships Complete & Assembled & Includes the Following:
-
Hydraulic Hoses (Pressure, Return & Drain Line) and Suitable Couplers:
-
Customer is Responsible to Advise Make & Model of Machine as well as Coupling Diameter as Applicable.
-
Direct Drive Hydraulic Motor for Mower Head.
-
Integrated Pressure Relief Valve for Drive System Protection.
-
31" Dia (Rotary) Side Trimmer Mower Head has 2 Solid Steel Swinging Blades to Provide the Best Possible Cut!
-
Sharpenable Blades are 5/16" thick x 3-1/8" wide x 8-3/4" long.
-
Outside edge/max Reach of the Mower Head from Hitch Frame Center-Line, Fully Retracted is 70".
-
Heavy Duty Thick Wall Tubing Supports the Rotary Head Which is Supplement with Knee Brace Tubing Which Provides 'Left-Center-Right' Side Positioning Adjustments.
-
Hydraulics Require Pressure & Return Ports as Usual, but a Drain Port is Also Required!
-
With a 31" Dia Cutting Width, it's the Largest Available; and For Reliable Quality, it's Not a Cheap Imported Product!
-
Horizontal Side Trimmer Mower Head Swing Return Managed by an Adjustable Double Spring System:
-
Swing Tension Can Be Mild for Fragile Stems, Trunks & Posts, or Rigid for Faster Ground Speed, and Also for Steep, Uphill Travel!
-
Sample Photos show Mower on a Tractor & Skidsteer for reference only - Tractor/Skidsteer are Not included.
Actual Video of ST-SSQA Coming Soon. The Trimmer Head shown along with the performance & results are identical on both units.
-
ST-SSQ/A is Suitable for Standard Skidsteer Q/A Systems.
-
Suitable for Standard Hydraulic Flow Rates of 8 to 20GPM:
-
Drain Line 'Port' is Required!
-
Minimum Cutting Height: 1-1/2" to 2".
-
Overall Diameter of Cutting Head: 36".
-
Overall Cutting Width: 31".
-
Foam/Rubber Bumper is 1-1/2" Dia.
-
Metal Channel that Rubber Bumper is secured in is 3/4".
-
With the Rubber Bumper & Metal Channel, about 2-1/2" will not be Cut.
-
Overall Vertical Dimension (bottom of Blade Carrier to Top of Hyd Motor) of Side Trimmer Mower Head is 11":
-
Dimension from Bottom of Pan Carrier to Top of Cutter Deck is 4".
-
Side Trimmer Mower Head Speed is 2400RPM's.
-
Rotor & Blades Rated to Cut 2" Diameter Material.
-
Weight: 275lb's w/Hoses & Couplers (Less Pallet/Crating, etc.).
-
Specifications are based on manufacturer provided data & subject to change.
|
|
 |
 |
 |
 |

|