|
|
|
|
Peruzzo EX63, 63" Excavator Flail Mower, Shredder, Mulcher with Swinging Blades!
Expect This Peruzzo Flail Mower & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
GENERAL FEATURES:
-
This Peruzzo Flail Mower Has 72 Larger, Swinging Blades:
-
Peruzzo Flail Mowers Are Always Highly-Populated With Blades to Provide the Best Possible Cut & Reduce the Burden on Your Excavator!
-
Swinging Blades Will Last Longer & Be More Efficient During Operation By Reducing The Demand Back to Your Excavators Hydraulic System - Very Important On Smaller Excavators With Limited Hydraulic Capacity!
-
Triple 'Y' Blades Provide Universal Results From Cutting Grass, To Mulching Up To 3" Diameter Material.
-
Direct-Drive Hydraulic Motor Eliminates Drive Belts, Reducing Wear Parts & Down Time, and Provides Better Power Transfer!
-
With An Anti-Cavitation Valve As A Standard Feature, Not Only Are Abrupt Hydraulic Shutdowns Eliminated, But The Need For A Case Drain Is Also Eliminated (For Standard Flow Applications Up To 28GPM) & A Longer Hyd. Motor Life Can Be Expected Too!
-
Hydraulic Systems With 28GPM & Higher Require A Case Drain!
-
Bi-Directional Flail Rotor Has Advantage Of Left to Right Dynamic Sweeping & Using Both Sides Of Blades w/o Flipping Them!
-
Sample Photos Are Of The EX42 Flail Deck, But This Listing Is For The EX63, As Noted!
-
Sample Photos Show Excavator For Reference Only - The Excavator Is Obviously Not Included!
-
Sample Flail Mower Photos Shown with Cat Pin Grabber Coupler.
-
Ships Complete with Excavator Coupler, Hydraulic Hoses & Hydraulic Couplers - Excavator Coupler Style & Hose Length MUST Be Specified!
-
Suitable for:
-
16 - 40GPM Hyd. Systems @ Max. 3625PSI.
-
7 to 25 Ton Excavators.
-
Cutting Width: 63".
-
Overall Dimensions: 78" Wide X 36" Deep X 24" Tall.
-
Max. Mulching Capacity: 3" Diameter.
-
24 Blade Holders for a Total of 72 Cutter Blades.
-
Deck Thickness: 3/8".
-
Side Plate Thickness: 3/8".
-
Rotor Speed is 3000 RPM.
-
Rotor Tube Thickness: 1/2".
-
Rotor Tube Diameter is 6-1/4".
-
Blade Speed is 170 MPH.
- Triple 'Y' Blades Are 8mm Thick Each.
-
Working Diameter, 'Blade Tip to Blade Tip' is 19".
-
Built-In Relief Valve Provides System Protection.
-
Weight: 1,355lb's (Less Excavator Coupler & Hoses).
-
Specifications are based on manufacturer provided data & subject to change.
|
|
|
|
|
|
|