|
|
|
|
OMARV CT120, 48" Excavator Flail Mower, Shredder, Mulcher with Rear Roller & Swinging Hammer Type Blades!
Expect This OMARV Flail Mower & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
GENERAL FEATURES:
-
This OMARV Flail Head Has 30 Swinging 'Hammer' Blades (Available also with 60 'Y' Blades):
-
OMARV Flail Mowers Are Always Highly-Populated With Blades to Provide the Best Possible Cut & Reduce the Burden on Your Excavator!
-
Swinging Blades Will Last Longer & Be More Efficient During Operation By Reducing The Demand Back to Your Excavators Hydraulic System - Very Important On Smaller Excavators With Limited Hydraulic Capacity!
-
Hammer Blades Are Double Sided, Reversible & Sharpenable, and Have Much Longer Lives Than 'Y' Blades!
-
Optional 'Y' Blades Are Also Double Sided & Reversible.
-
Adjustable Rear Roller!
-
Replaceable Skid Shoes.
-
Case Drain Plumbed For Hydraulic Motor Protection.
-
Openable Hood For Additional Access.
-
Sample Flail Mower Photos Shown with John Deere Quick Coupler.
-
Actual Attaching System Will Be One Selected From List Below, As Required For Customers Application:
-
Bobcat 331: Pin-On.
-
Case 75MSR, CX31, CX36B: Pin-On.
-
Cat 305CCR: Pin-On.
-
Deere 35D, 50D, 60D: Pin-On or Quick Coupler.
-
Deere 75D, 80D, 85D, 310SJ: Pin-On.
-
Komatsu PC78, PC88: Pin-On.
-
Kubota KX040, KX151, KX161, KX90, KX91, KX121, U35, U45: Pin-On.
-
Kubota KX40, KX91-3, KX057, KX080, KX121-3, KX161, U35, U55: Quick Coupler.
-
Takeuchi TB53, TB80FR, TB035, TB053, TB070, TB135, TB145, TB153FR, TB175, TB180FR, TB235, TB228, TB250, TB285: Pin-On.
-
Yanmar B50: 027 Coupler.
-
Yanmar V1045-5: Pin-On.
-
Attaching System for Additional Makes & Models (Listed Below) Available to List Separately at $300.00 Additional Cost:
-
Cat 307, 308: Pin-On.
-
JCB 3CX: Pin-On.
-
Volvo EC55, EC58, EC88: Pin-On.
-
Wacker Neuson/Mustang 3503, 5003: Pin-On.
-
Sample Photos Are Of The CT100 Model, But This Listing Is For The CT120!
-
Ships Complete with Hydraulic Hoses & Couplers - Hose & Coupler Sizes MUST Be Specified w/Order, or Generic Sizes will be Provided.
-
Suitable for:
-
16 - 30GPM Hyd. Systems @ Max. 3250PSI.
-
7 to 12 Ton Excavators.
-
Cutting Width: 48".
-
Overall Width: 56".
-
Max. Working Capacity: 3" Diameter.
-
30 Blade Holders w/30 Double Sided Hammer Blades:
-
Working Diameter, 'Blade Tip to Blade Tip' is 17".
-
Built In Relief Valve Provides System Protection.
-
Weight: 802lb's:
-
Does Not Include Weight of Quick Coupler, Typically About 75lb's.
-
Specifications are based on manufacturer provided data & subject to change.
|
|
|
|
|
|
|