|
|
|
|
OMARV Commercial Duty Series C2400: 8' Cut, 2' Hydraulic Right Side Offsetable Flail Mower, Mulcher!
Expect This OMARV Flail Mower & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
GENERAL FEATURES:
-
The C2400 Offers the Following Unique Advantages:
-
High HP Gearbox & Machine Suitability.
-
Severe Duty Rotor with Large Forged & Hardened Hammer Blades.
-
Heavy Duty 3/16" Thick 3-Point Frame Tubing.
-
Double Skin Deck For Durability & Long Life!
-
This OMARV Flail Mower Has 24 Extra Large Forged & Hardened Steel Hammer Blades - OMARV Flail Mowers Always Have the Highest Population of Blades to Provide the Best Possible Cut & to Reduce the Burden on Your Tractor!
- OMARV Mower Gearboxes Include an Over-Running Clutch, Which Provides Two Advantages:
-
First, Easy Alignment & Attachment of the Mowers PTO Shaft to the Tractors PTO Shaft:
-
The O.R. Clutch Enables you to Freely Spin the PTO Shaft & Gearbox for Alignment!
-
Second, Smooth Shut Down:
-
The O.R. Clutch Allows the Mower Gearbox to Free Wheel to a Stop, Eliminating Abrupt Shutdowns & Wear of the PTO Brake!
-
Large Diameter Rear Roller Provides Mower Deck Suspension & Cutting Height Adjustment (1/2"-5").
-
Under Deck, Mulching Counter Blade Ensures Reduction of Larger Clippings & Further Reduces the Smaller Ones.
-
2' Right Side Hydraulically Offsetable.
-
Multiple Advantages of This Offsetable Mower Over Static, Center Mounted 3-Point Mowers:
-
If you are Mowing along a fenceline, treeline, building, etc., instead of getting your entire Tractor along side of the Fence or Building (and risk scraping your Tractor tires or snagging & damaging trees, posts, fencing, buildings, etc.), you can simply keep the Offset part of the Mower close to the edges you want to Mow and prevent any damage to the Tractor or the trees, fencing, walls, etc. Snagging posts, trees or other secured objects can also damage the 3-Point linkage on the Mower or even the pull arms & top link of your Tractor.
-
Much Better Visibility: If the edge of any Mower is flush with the sidewall of your tractors tire, forget about visibility! You will be cutting with your tractor tire as a 'guide', which is ok in open areas, but again, when you are Mowing up against obstacles, you want visibility, and the Offset feature will provide that. It will also eliminate the need to look back over your shoulder to see the Mower Deck. A simple glance to your right gives you visibility of the outer Mowing edge.
- OMARV Flail Mowers Provide a Much Better Cut Than Standard Rotary Mowers, Plus With the 'Forged & Hardened' Hammer Blades on This Flail Mower, You Can Cut 4"-5" Diameter Material & Get a Very Good Finish Cut Too!
- OMARV Flail Mowers Are The Safest & Most Efficient Mowers Available:
-
With OMARV Flail Mowers, the Possibility of Discharging Dangerous Projectiles is Dramatically Reduced Compared to Conventional Rotary Mowers, and with the Reduced Deck Depth & Weight, They're the Easiest for You & Your Tractor to Handle! Plus, the Superior 'Single-Pass' Cut of OMARV Flail Mowers Provides New Efficiencies by Eliminating Multiple Passes For Excellent Results!
-
Powder Coated Paint!
-
Sample Photos Show a C3000 OMARV Mower on Our ADROIT 175 Bi-Directional 'BETTER' Tractor For Reference Only - Tractor Is Not Included & This Listing Is For The C2400 OMARV Mower As Indicated!
-
Sample Video in This Listing is for an OMARV C3000, But This Listing is for an OMARV C2400!
-
Mower Includes 1000RPM PTO Shaft.
-
Rated for 90HP to 130HP Tractors.
-
Suitable for Cat 2, 3-Point Hitches.
-
Mowing Width: 8'-0".
-
Overall Width: 8'-6".
-
Overall Depth: 44".
-
Electronically Balanced Rotor Has 24, Extra Large Forged & Hardened Steel Hammer Blades.
-
Rotor & Blades Rated to Cut To 4"-5" Diameter Material.
-
18" Blade Tip To Blade Tip Rotor Diameter!
-
9" Diameter Rear Roller.
-
Weight: 2,493lb's (Less PTO Shaft, Pallet/Crating, etc.).
-
Specifications are based on manufacturer provided data & subject to change.
|
|
|
|
|
|
|