 |
 |
 |
 |
WRAG Basic XL300, Commercial Duty 3-Point Post Driver (SS Q/A Adaptable) with Pilot Hole Rock Spike: Quick Hitch Compatible, Self-Contained, Springless, 90° Swing, 4-Way Hydraulic Tilt, Telescopic Offset & Hydraulic Power Leg!
Expect This Post Driver & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
GENERAL FEATURES:
-
In Addition To Hydraulic (Left & Right) Tilt Adjustments & 110,000lb's of 'Springless' Driving Force, This WRAG Driver is Also Self-Contained!
-
Pilot Hole Rock Spike & Hydraulic Extractor Kit with 4" Tip.
-
The Self-Contained Feature Eliminates the Need to Run a Hydraulic Return Line Hose to The Hydraulic Reservoir Filler Neck (Usually in the Engine Compartment)!
-
The Springless Feature Eliminates The Maintenance & Seasoning of Springs, The Expensive Replacement Cost of Them & Also Eliminates The Unexpected Down Time Caused by Broken Springs!
-
Plus, the Unique Springless, Drop Weight Type of Hammering Action, Makes This The Most Stable Driver Available - Again Contributing to Efficiency & Straight Posts!
-
4-Way (Front & Back) Tilt Adjustment is Hydraulic.
-
90° Swing is From Rear Center Mounted Position to Right of Tractor (Rotating Counter-Clockwise).
-
Horizontal Telescoping Feature Offers 14-1/2" of Adjustment in Any Location of the 90° Swing.
-
Hydraulically Telescoping Power Leg Makes Height Positioning a Piece of Cake!
-
Rear, Manually Adjusted Rear Stabilizer Legs are Standard & Work in Conjunction With The Telescoping Power Leg.
-
All Of The Unique & Easy To Use Positioning Features Assist in Driving Straight Posts & They Eliminate the Need for Constantly Re-Positioning the Tractor to Achieve Precise Placement of the Driver & Post, Providing an Overall Operation Efficiency!
-
WRAG Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility!
-
Expect the Industrial Poly/Cotton Braided Rope to Have a Very Long & Trouble Free Service Life, and To Be Safe & Easy on Your Hands!
-
This Unique Driver is Also Void of Cables & Hinged Masts, Which Are More Maintenance Points & Which Can Work Against The Operator!
-
Also, Since the Post is Not Nested in The Webbing of an 'I' Beam (as w/Most Drivers), This WRAG Driver Enables Filling an Existing Fence Line with Posts, w/o Stretching or Damaging the Existing Fence!
-
Driver Includes the Following:
-
Hydraulic Hoses & Couplers.
-
Driver is Shown on a 'LS' Tractor for Reference Only - Tractor is Not Included.
-
Minimum Hydraulic Requirement is 15GPM/1800PSI.
-
Maximum Post Diameter: 10".
-
Functionality Dimensions:
-
Horizontal Telescoping & Offset (Travel Range is 14-1/2"):
-
Center of 3-Pt Frame to Center of Post Cap, Retracted is 57".
-
Center of 3-Pt Frame to Center of Post Cap, Extended is 71-1/2".
-
For 15" More Hydraulic Offset, See The Commander XL300.
-
Driver Legs Fully Extended:
-
Drives Maximum 9' Long Post.
-
Drives Down To +/-30" Above Grade.
-
Driver Legs Fully Retracted:
-
Drives Maximum 8' Long Post.
-
Drives Down to 18" Above Grade.
-
Above Spec's for Post Lengths & Above Grade Positioning are Conservative & Subject to Tractors 3-Point & Tire Sizes.
-
Above Spec's are as Measured on a 80hp Tractor w/30" Rear Tires, Lift Links Mostly Extended.
-
Hammer Weight is 660lb's.
-
Impact at Full Stroke is 110,000lb's.
-
4-Way Tilt Adjustment (Left/Right-Front/Rear) is About 22°.
-
Tilt Adjustment Can Be Used in Any of The Other Articulated Positions!
-
Horizontal Swing is 90° and is Complimented with The Horizontal Telescoping Feature!
-
Weight is 2,196lb's with Rock Spike Kit.
-
Specifications are based on manufacturer provided data & subject to change.
|
|
 |
 |
 |
 |

|