Home > Skid Steer Attachments >

Skidsteer Post Driver, Pounder, Danuser SM40 Hammer: Grapple & Tilt: SHIPS FREE TO SELECT STATES
Danuser SM40 Skid Steer Driver


 
More Views:


Our Price: $6,999.00


Availability:: Usually Ships in 1-10 Business Days

Description
 

Danuser SM40 SKID STEER MOUNTED Post Driver with Pick Up Grapple & Tilt Adjust!

Expect This Driver & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!

GENERAL FEATURES:
  • This Danuser Driver is a Commercial Duty Machine and we Sell them at the Best Prices!
    • We have Many Customers that have Driven Thousands of Posts and the Drivers are Still at Work!
  • The Driver in this Listing INCLUDES the Pick-Up Grapple & Hydraulic (Left to RIGHT) Tilt!
    • The Toggle Switch 'Control Box' Allows Continuous Operation From the Skid Steers Cab and the Grapple will Pick the Post Up Off the Ground & Set it for Pounding - Hand Loading of the Post is NOT Required!
    • Partial Strokes for Tamping Short Distances Can Be Done by Momentarily Releasing the Tractors Hydraulics During the Driving Cycle.
    • The 'Control Box' Will Require a Fused Hot & Chassis Ground Electrical Connection. This Listing Includes a "Cigarette Lighter Adapter" as a Battery Connection Substitute, but of course, your Skid Steer must have a Cigarette Lighter!
    • Optional 8 & 14 Pin Connectors are Available Separately.
  • The Notched Weldment (on Lower Left Front) is for Attaching a Chain for use as a Driving Depth Guide or for Extracting Posts.
  • A Grated Step (on Upper Left Side) is also Included.
  • This Driver Does NOT Use:
    • Springs (a common wear item).
    • Return Line Hose (a common nuisance for many Skid Steers!).
  • Driver Uses a Self-Contained Hydraulic System and does not Require a Special Return Line Kit.
  • Driver Ships Complete Including 'In Cab Electric Control Box', Hydraulic Hoses & Couplers.
OPTIONS AVAILABLE:
  • Additional 220lb Weight Kit. Useful in Tougher Soil Conditions, or Simply To Speed Up the Driving Cycle. Cost is $299.00, Installed!
  • Donut Striker Plate. Recommended When Driving Pipe or Posts Less Than 5" Diameter. Helps Keep Posts Centered in the Driver, Especially in Tougher Soil Conditions. Also Helps to Keep the Danuser 'T' Post Adapter Centered too. Cost is $70.00.
  • 'T' Post Adapter, Obviously Used for Driving 'T' Posts! Cost is $120.00.
  • Guard Rail Striker Plate. Recommended When Driving 6" or 8" 'I' Beams/Guard Rails. Helps Keep 'I' Beam Rails Centered in the Driver. Cost is $70.00.
SPECIFICATIONS:
  • Hydraulic Requirements are Min. 1500PSI & Max. 30GPM Flow.
  • Drives up to 8.5" x 9.25" Post.
    • Will Drive Anything That Fits in This Dimension - Wood Posts, Steel Pipe, Guard Rails, Rail Road Ties, etc.!
  • Maximum Post Length is Subject to Lift Height of Skid Steer.
  • Left to Right Tilt Adjust is 20 Degrees.
  • Standard Factory Hammer Weight is 300lb's.
    • This is a High Impact Post Driver with up to 35 Strokes per Minute!
    • Impact with 300lb's is 1,025lb's.
    • Impact with Optional 200lb Weight (500lb's total) is 1,709lb's.
  • Grapple Closes to a Minimum of 2-1/2".
    • Not small enough to grab a 'TEE' Post.
  • Maximum Stroke is 40".
  • Overall Length is 46".
  • Overall Width is 25.5".
  • Overall Height is 64".
  • Weight is approx. 1055lb's.
  • Specifications are based on manufacturer provided data & subject to change w/o notice.

Plus We're Glad To Say Danuser Products Are MADE IN THE USA!

Free Shipping Is To A 'Commercial Business Location' In A 'Commercial Business District' (With Capabilities To Unload) Or To The Nearest Truck Terminal Served By Our Shippers In The Following States:
  • Alabama
  • Arkansas
  • Colorado
  • Georgia
  • Illinois
  • Iowa
  • Indiana
  • Kansas
  • Kentucky
  • Louisiana
  • Michigan
  • Minnesota
  • Mississippi
  • Missouri
  • Nebraska
  • New York
  • North Carolina
  • North Dakota
  • Ohio
  • Oklahoma
  • Pennsylvania
  • South Carolina
  • South Dakota
  • Tennessee
  • Texas
  • Virginia
  • West Virginia
  • Wisconsin
"Farm, Ranch, Rural, Residential Delivery Is Available For An Additional $50.00. Contact Us For A Pro-Rated Shipping Cost To ALL OTHER STATES!"

SHIPPING TIME STATES '1 TO 10 DAYS' ONLY TO ACCOMMODATE THE WORST CASE, OR UNEXPECTED CIRCUMSTANCES - DRIVERS ARE TYPICALLY IN STOCK - YOU'RE WELCOME TO CALL FOR AVAILABILITY!

Farm Equipment 24-7
Online Store of Iowa Farm Equipment
A FULL SERVICE DEALERSHIP
Providing Parts & Warranty Coverage Nationwide!
563-946-2122

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Skid Steer Attachments
Skid Steer Attachments > Post Drivers
Post Drivers
Post Drivers > Skid Steer Mounted Post Drivers