Home > Straw & Hay Blowers/Processors >

Hay & Straw Bale Processor, Bale Grinder, Straw Blower, Bedding Blower, Spreader!
IFE 3PT, PTO Powered Bale Grinder

More Views:

Our Price: $3,999.00

Availability:: Usually Ships in 1 to 2 Weeks


IFE (Iowa Farm Equipment) 3-Point, PTO Powered, Top Load Hay & Straw Bale Processor With One Ground Discharge Chute.

Expect This Bale Processor & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!


  • With Direct PTO Drive (no Belts, Pulleys, etc.) & common wear parts (that we stock), this is the most powerful, simplest, lowest maintenance Bale Processor available!
  • Bales Are Fed In To The Top Hopper & Discharged Horizontally From Lower Rear Corner.
  • Blades & Cutters Are At The bottom Of The 36" Tall Tub & Stand About 3" Above The bottom.
  • For Safety:
    • Keep All Body Parts Away From The Bottom Of The Tub!!!
    • Inspect The Inside Of The Tub Before Starting!!!
  • Shredder Blades Can Handle Hemp Or Poly Twine.
  • Retractable Rear Bale Holder Provides A 19" Wide x 39" Long Shelf.
  • Processor in this listing includes 1) Ground Discharge Chute Only.
    • The long, overhead Chute with Directional Deflector is Optional.
      • Tip is 9'-5" above grade & 20" Center Extension is removable.
      • Cost for Optional Overhead Chute is $599.00.
  • Direct horizontal discharge distance (w/o Spout) varies from 8' to 15'.
    • Discharge distance subject to tractors HP & bale types.
  • Ships complete with 540RPM PTO Shaft.
  • Requires A Minimum Of 30HP For Efficient Operation.
  • Suitable For Cat 1, 3-Point Hitches.
    • Adaptable To Cat 2.
  • Average Time To Process 1 Square Bale Is About 10 Seconds.
    • Processing Time Can Be Faster Or Slower Depending On Tractor HP & Bale Types.
  • Overall Dimensions:
    • 63" From Grade To Top Of Tub.
    • 36" Wide W/O Spout Attached.
    • 46" Deep With Bale Shelf Contracted.
    • Length Is 62" When Rear (Telescopic) Bale Rack Is Extended.
    • Tub Dimensions Are 26" Diameter x 36" Tall.
  • Short Horizontal Spout Is 6"x6"x28.5".
  • 25 Blades On The Rotating Floor Cut Against 26 Blades On The Tub Bottom.
    • With this many Blades, Hay & Straw is very Shredded, and demand to Tractor is reduced!
  • 300x70 Solid Rubber Tires.
  • Weighs 435lbs.
  • Specifications are based on manufacturer provided data & subject to change w/o notice.

Provide Us With Your Zip Code For A Quote Of Our Affordable Nationwide Shipping Prices!


Farm Equipment 24-7
Online Store of Iowa Farm Equipment
Providing Parts & Warranty Coverage Nationwide!

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Straw & Hay Blowers/Processors