Brand New 17 Piece Decal Set for 1010 Gas or Diesel Tractors.

Photo of 4020 decals is for sample detail only - you are purchasing decals for a 1010 tractor.

THIS IS A SUPERIOR DECAL SET FOR BOTH APPEARANCE AND EASE OF INSTALLATION!

BETTER SIDE PANEL DECALS: The Outlined "1010" Side Panel Numbers provide the Original Painted Appearance - they do not have the overlapping plastic rectangular backing! We have provided a photo of Side Panel Decals from our own 4020.

BETTER "DIESEL" TEXT DECALS: The DIESEL text Decal also has the Original Painted Appearance and also does not have the overlapping plastic rectangular backing.

EASIER TO INSTALL: Since The Side Panel Decals (both the Model No & The "DIESEL" text) are on one backing sheet and are placed as one unit, you dont need to be concerned about placing one number at a time, then alingning them to the Side Panel, then to each other, then alingning the DIESEL text to the model numbers. Simply peel off the single protective covering on the adhesive side of the decals, position the sheet (with the Model Number & Diesel decals) and press the decals onto the clean & painted surface. Then carefully peel off the single backing sheet.  Again, this assists in the accurate spacing of the Model Number Text as well as the spacing of the DIESEL text under the Model Numbers.

All the other Decals are made with the same quality and ease of installation in mind. All of the Graphics and Text will be Clear & Definite, free from any smears, smudges or blurring!

The 17 Decals are:

• (2) 1010 Model Number Decals for the Side Panels.
• (2) DIESEL Decals for the Side Panels.
• (1) CAUTION Decal for your Fender.
• (1) RAISE LOWER Decal for the 3-Point.
• (1) ON-OFF Decal for the PTO.
• (2) CAUTION Decals for the Fan Shroud.
• (1) PTO Warning Decal.
• (1) DANGER Decal for the Starter.
• (1) LEAPING DEERE Decal for the Rear Seat Bracket.
• (1) FUEL Decal.
• (1) INSPECT DAILY Decal for the Air Filter Housing.
• (1) FUEL FILTER & WATER SEPARATOR Decal.
• (1) SYNCHRO SHIFT Pattern Decal.
  • This Set has the Original, Thinner & Longer Synchro Shift Decal w/3 Reverse Positions used on 1010's & 2010's!!!
• (1) BE CAREFUL Decal for the Electrical Compartment Door.
  • This Decal does have a Glossy, Silver & Chrome appearance, which creates too much reflection for a good picture. It really does look as good as the Original Metal Plate.
  • Also, though the Decal is an identical reproduction, it is a Decal - not a Metal Plate as the original. If your Original Plate is in good enough condition, you can simply stick this one over the Plate.

Plus, we are glad to say that all of these Quality Decals are MADE IN THE USA!