Brand New 8 Tooth Toothbar for Buckets with INSIDE Dimensions of 68" to 68-3/8".

• Toothbar Attachs Easily to the Loader Bucket. Each end of the Toothbar has a mounting Flange with a slotted hole for attaching hardware to fit through. You will need to drill one matching hole on each end of the Buckets Sidewall and bolt the Toothbar on with 5/8" or 3/4" diameter bolts - length as required.
• This Toothbar will work ONLY on Buckets with Weld-On Cutting Edges!
• We have Toothbars for Bolt-On Cutting Edges Available to List on our Store, but we will need dimensions for fabrication and pricing. To provide us with the required dimensions, go to www.iowafarmequipment.com/boltontoothbartemplate.html fill out the Template and e-mail it back to us at AS@IFE1.com.
• Bolts, Nuts & Washers are not Included.
• Toothbar extends back into the Bucket by about 6" (from the front of the buckets cutting edge) and the Teeth extend beyond the front of the Bucket by about 6".
• The Forged, High Strength, Solid Steel Shanks are 1-1/8" square and are welded to a High Carbon Steel Cutting Edge.
• The Replaceable Tips are 1-3/4" wide.
• This is a Very Heavy Duty Toothbar, good for Buckets on Tractors or Skidsteers. They make a dramatic improvement in digging and clean up of all types of material, multiplying the work of the Tractor and the Bucket! They will pay for themselves quickly!
• Weighs about 74lb's.